CN/EN
YOUR POSITION:HOME > Blog >

Operating Instructions for Non Woven Double Layer Lamination Embossing Machine

Author:HB Nonwoven MachineryFROM:Compressed Towel Machine Manufacturer TIME:2023-12-16

Operating Instructions for Non Woven Double Layer Lamination Embossing Machine

Introduction

The non woven double layer lamination embossing machine is a crucial equipment in the hygiene industry, specifically for the production of diaper and sanitary napkin components such as backsheet and topsheet. This operating manual provides a comprehensive guide on how to operate the machine effectively and efficiently to ensure high-quality output.

Safety Precautions

Prior to operating the machine, it is essential to prioritize safety. Follow these precautions:

1. Always wear appropriate personal protective equipment (PPE) such as gloves and safety goggles.

2. Make sure the machine is properly grounded.

3. Keep the working area clean and free from any obstructions.

4. Familiarize yourself with the emergency stop procedures.

5. Never reach into moving parts while the machine is running.

Machine Setup

Before starting the machine, ensure the following steps are carried out:

1. Connect the machine to a reliable power source and switch it on.

2. Inspect the machine for any loose or damaged parts.

3. Adjust the pressure settings according to the product requirements.

4. Set the desired embossing pattern and adjust the alignment if necessary.

5. Ensure an adequate supply of raw materials for uninterrupted operation.

Loading Raw Materials

To load the raw materials onto the machine, follow these steps:

1. Unroll the non woven fabric for the bottom layer onto the feeding tray.

2. Align the edges of the fabric with the machine's designated guides.

3. Securely fasten the edges of the fabric to prevent any misalignment during operation.

4. Repeat the process for the top layer, ensuring proper alignment with the bottom layer.

5. Cut off any excess material to ensure a smooth and consistent feed.

Machine Operation

652d01ab6ad93.jpg

To operate the machine effectively, follow these steps:

1. Start the machine and adjust the speed as per the desired output.

2. Monitor the machine closely for any abnormal noises or vibrations.

3. Ensure the raw materials are correctly fed into the machine without any folds or wrinkles.

4. Regularly check the embossing pattern to ensure it meets the required specifications.

5. Make adjustments to the pressure and alignment settings if necessary to maintain product quality.

Maintenance and Cleaning

Regular maintenance and cleaning are essential for prolonging the machine's lifespan:

1. Shut off the power supply before performing any maintenance tasks.

2. Clean the machine regularly, removing any dust or debris that may accumulate.

3. Lubricate the moving parts according to the manufacturer's recommendations.

4. Inspect the machine for any signs of wear and tear and replace any damaged parts promptly.

5. K

652d0204cef89.jpg
eep a record of maintenance tasks to ensure timely servicing of the machine.


Troubleshooting

If any issues arise during operation, follow these troubleshooting steps:

1. Stop the machine immediately and turn off the power supply.

2. Identify the root cause of the problem by inspecting the machine's c

652d01e559df8.jpg
omponents.


3. Refer to the machine's manual or consult with a technician for guidance on resolving the issue.

4. Only restart the machine once the problem has been identified and resolved.

Conclusion

The non woven double layer lamination embossing machine is a complex piece of equipment that requires careful operation and maintenance. By following this operating manual, users can ensure the safe and efficient operation of the machine, resulting in high-quality diaper and sanitary napkin components.

Industry News

Need Help?
Do you have questions about our products or orders? Or do you run into technical issues? Our General Support section can resolve your question.
Contact US >

Tel: +86-18350778618

Email: info@qzhanbang.com

MP/WhatsApp: +86-18350778618

Manufacturer Address:No. 80 Yuanxi Road, Xixiliao Village, Anhai Town, Jinjiang City, Quanzhou City, Fujian Province

NEW KEYWORD

About Us

Machines

Information