Description Services Main Parts Advantage Quality control FAQ
CN/EN

Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby Diaper

2 machines, operated by one person, with a production width of 190mm, 60 meters per minute, and an actual output of 1.2-1.3 tons/machine in 12 hours.

Price: Negotiable
Model: HBJX-W1200-SD
Power: Three-phase, 380V, 50HZ. Total installed power:35KW
Finished Product Specifications: Width 75-1200mm, roll diameter 850mm
Raw Material: Air-through nonwovens and spunbond nonwovens
Speed: 100m/min, effective production speed: 60-90m/min
Dimensions: length * width * height = 4.2*2.6*2.1meters (1200 model)
Qualified Rate: ≥98%
Configuration: Full servo configuration
Equipment Color: The main body is off-white
Certification: CE, ISO
Working Voltage: 380V
Working Air Pressure: 6Bar
Temperature Range: 0℃-45℃
Place of Origin: CHINA.

Get Quote

17.jpg

压缩后.jpg

纺粘无纺布应用于纸尿裤面层材料.jpg

Widthmm

Double shift capacity

19-24g/M2

Dimensions

length*width*height

1200

0.9-1.4T

4.2*2.6*2.1m

Operating Voltage

Working air pressure

brand

AC380V50HZ

0.5-0.7MPa

HANBANG AUTOMATION

 
   HB

1. Unwinding: The unwinding station adopts a single station, and one set of servo is used for automatic unwinding. Pendulum type automatic tension detection feedback, base active manual correction adjustment. Set "Emergency Stop" - "Manual" - "Jog" buttons at the unwinding station to facilitate precise manual unwinding of excess tailings of materials.

The unwinding is equipped with a manual material splicing hot welding device to avoid tape splicing and damage to the mold to save time.

2. Mold: adopt one support and one configuration. Same power servo drive as preheating. Equipped with a separate multi-wheel low seat with card position. Loosen the locking screw and pull it out, which avoids lifting and transportation when replacing the mold, which can greatly save the time of mold replacement and disassembly. Electronic gears are set up in the system, and parameters can be directly input for different molds to be replaced, avoiding the need to disassemble and assemble the synchronization wheels.

3. Mold preheating roller: mold + inner sleeve type preheating roller, fast preheating and energy saving.

4. Cooling device:

High-precision grinding cold water roller, containing sleeve, large wrap angle contact, fast cooling. The temperature can be controlled within 10 degrees to ensure rapid cooling after the mold comes out and avoid wind deformation. Servo drive, dedicated standard domestic chiller, can be used independently without the need for a water tower.

5. Cutter: There are 12 sets of universal pneumatic pressure cutter sets. The bed knife is made of one-piece tool steel, heat-treated and ground, with a hardness of 60°±2°.

6. Rewinding device: The rewinding station adopts dual-station automatic switching of rewinding. The power uses 3 sets of servo and transmission rewinding + 2 sets of high-speed motors to assist in station switching. The entire machine does not require a reducer or shutdown during the roll changing operation. Ensure constant tension and improve hole pattern punching rate.

7. Control system: The whole machine adopts Mitsubishi PLC + 10.5-inch Wei Luntong touch screen. Automatic detection of servo constant tension, processed by PLC programmable information microcomputer, can realize automatic tension control between all servos. The whole machine system is equipped with general operation rights and machine repair operation rights. Machine repair operators can save the adjusted data to avoid misoperation by production employees. The fixed meter number can be set to automatically change the roll, and the rewinding meter number is adjustable.

Related Resource


Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby DiaperRelated Services
After-sales service

1. After-sales service

We provide continuous support and assistance throughout the life of the Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby Diaper.

2. Remote monitoring and diagnostics

Our advanced technology allows us to remotely monitor and diagnose the machine's performance, minimizing downtime.
Remote monitoring and diagnostics
Process improvement consultation

3. Process improvement consultation

Our team will assess your current processes and provide suggestions for enhancing efficiency and reducing costs.
Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby DiaperMain Parts

1. Unwinding System

This component is responsible for unwinding the non woven fabric roll, ensuring smooth and consistent material feed into the machine.

2. Machine Control Panel

The control panel serves as the interface for operators to set parameters, monitor machine status, and adjust settings, providing convenient and user-friendly operation.

3. Cutting Blades

Cutting blades are used to trim excess edges or remove faulty sections of the non woven fabric, ensuring high-quality output and minimizing waste.
Manufacturer Advantage We have strong power to support our production, from factory environment construction to equipment
configuration, all leading to high quality products.
Superior Performance

Superior Performance

The machines produced by the manufacturer deliver superior performance in terms of speed, precision, and reliability.
Competitive Pricing

Competitive Pricing

The manufacturer offers competitive pricing for Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby Diaper, making them accessible to a wide range of customers.
Cost-Effective Solutions

Cost-Effective Solutions

Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby Diaper manufacturer offers cost-effective solutions that provide great value for money, helping customers maximize their investment.
Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby DiaperRelated Quality Control
Process Control
Establish and monitor key process parameters of Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby Diaper,Implement process control measures such as statistical process control (SPC) to detect and correct any deviations in production.
Electrical System Check
Inspect wiring, connectors, and electrical components for any signs of damage or malfunction.
Assembly Process
Ensure that all assembly processes are carried out following the specified guidelines and standard operating procedures.
Preventive Maintenance
Develop a preventive maintenance plan to regularly inspect, clean, and maintain Non Woven Single Unwinding Double Rewinding Embossed Punching Slitting Machine For Baby Diaper.
Related FAQ
1.How does the machine work?
The machine compresses individual towels through a hydraulic system, which applies pressure to reduce their size. These compressed towels can be easily stored and transported.
2.What is a disposable compressed towel machine?
The disposable compressed towel machine is a device used to manufacture compressed towels that are compact in size and expand when exposed to water.
3.What materials are used to make the compressed towels?
The towels are typically made from natural or synthetic fibers such as cotton or non-woven fabric, ensuring high absorbency and softness.
4.What sizes of compressed towels can the machine produce?
The machine can produce various sizes of compressed towels, with common options including 20cm x 20cm, 30cm x 30cm, 40cm x 40cm and so on .
5.What is the production capacity of the machine?
The production capacity depends on the specific model and configuration of the machine.
Need Help?
Do you have questions about our products or orders? Or do you run into technical issues? Our General Support section can resolve your question.
Contact US >
  • tel
  • +86-18350778618
  • Please Leave Message

    HANBANG MACHINERY
    +86-18350778618
  • info@qzhanbang.com
  • whatsapp
    WhatsApp